Feedthrough

Word FEEDTHROUGH
Character 11
Hyphenation N/A
Pronunciations N/A

Definitions and meanings of "Feedthrough"

What do we mean by feedthrough?

A conductor connecting two circuits on opposite sides of a printed circuit board. noun

A conductor that connects circuits or components on either side of a printed circuit board noun

Here you will find one or more explanations in English for the word feedthrough. Define feedthrough, feedthrough synonyms, feedthrough pronunciation, feedthrough translation, English dictionary definition of feedthrough.

Synonyms and Antonyms for Feedthrough

  • Synonyms for feedthrough
  • Feedthrough synonyms not found!!!
  • Antonyms for feedthrough
  • Feedthrough antonyms not found!

The word "feedthrough" in example sentences

He then saw another feedthrough that could be eliminated, and again started over on his design. ❋ Unknown (1991)

You can see the barely visible sample-command feedthrough at Trace B's leading edge. ❋ Unknown (2010)

You greatly reduce feedthrough by having no out-of-band response. ❋ Unknown (2010)

You don't see turn-off feedthrough due to the transconductance reduction of 1000-to-1 and the attendant 25-fold decrease in the frequency bandwidth. ❋ Unknown (2010)

Beyond 16 bits, residual feedthrough becomes objectionable, and you must use another approach. ❋ Unknown (2010)

The low feedthrough becomes irrelevant because the DAC's ring-time interval buries the small time and amplitude error, pointing the way toward practical 1-ppm DAC-settling-time measurements. ❋ Unknown (2010)

You can construct a low-feedthrough, high-resolution switch using wideband active components. ❋ Unknown (2010)

Placing the sampling switch after the residue amplifier further minimizes sample-command feedthrough. ❋ Unknown (2010)

When the control input goes high, the output reproduces the input with feedthrough settling in 20 nsec. ❋ Unknown (2010)

The small parasitic capacitance and the symmetrical differential structure of a diode bridge tend to cancel the drive signal and result in low feedthrough. ❋ Unknown (2010)

You can carefully optimize the switched current source for the lowest feedthrough on the rising control edge without regard to the falling-edge characteristics. ❋ Unknown (2010)

When the sample gate goes low, the transconductance switch goes off, and you can discern no feedthrough. ❋ Unknown (2010)

This approach allows you to minimize the feedthrough of the control pulse's rising edge without regard to falling-edge effects. ❋ Unknown (2010)

The aberration capacitance damps the peak feedthrough excursion of 5 mV. ❋ Unknown (2010)

The transconductance collapses on the falling edge, which ensures low feedthrough for that condition. ❋ Unknown (2010)

Cross Reference for Feedthrough

  • Feedthrough cross reference not found!

What does feedthrough mean?

Best Free Book Reviews
Best IOS App Reviews