Reamers

It's the actual bits, drills, tap, reamers, endmills, boring bars, guage pins, and thousands of other tools that would need to be purchased by machine shops to get the work done. ❋ Unknown (2009)

Slam Bang (SB) had wore out reamers and all three ended up having out of round chambers. ❋ Unknown (2009)

As far as I know now there are no reamers marked as "338 Federal", though as far as I know Federal has made no changes to the old wildcat other than the name. ❋ Unknown (2006)

I had a 338 Federal built on a m-98 mauser action as soon as reamers became available. ❋ Unknown (2006)

The trainees must learn that reamers have to be turned clockwise (even when removing the reamer) and that a permanent supply of cutting oil is necessary. ❋ Unknown (1990)

If it is quite clear that the exercises will be carried out by standardised reamers according to the “ISA system of tolerances and fits”, the respective sections should be taught on the basis of the ❋ Unknown (1990)

Tools, design and action of reamers Practice-related training can be continued based on main points contained in the ❋ Unknown (1990)

What is the effect of using straight-fluted reamers when reaming a hole with feather keyway? ❋ Unknown (1990)

Especially with longer bores, reamers must be taken out and cleaned during the reaming process, otherwise they will become jammed and break. ❋ Frank Wenghfer (1990)

- Capability of selecting the appropriate reamers and of using them appropriately. ❋ Unknown (1990)

The description of the cutting portion of straight hand reamers should be supported by showing machine reamers. ❋ Unknown (1990)

If it has not been possible to include the demonstration of the action of reamers in the instructions, this should be done right now before the exercises in the workshop begin. ❋ Unknown (1990)

Straight and spiral-fluted reamers cannot carry off any chips during the process, the chips remain in the chip grooves filling them after a short time. ❋ Frank Wenghfer (1990)

The use of rivet hole reamers, serial taper reamers and single taper reamers is to be described clearly. ❋ Unknown (1990)

A demonstration of the action of reamers should be included in the instruction. ❋ Unknown (1990)

The comparison of the relationship of the cutting portions makes it easy to see and understand where to use these reamers. ❋ Unknown (1990)

Instruction in the main subjects of “purpose of reaming; tools; design and action of reamers” is to be heavily supported by all those teaching aids available. ❋ Unknown (1990)

The instructor has to give a detailed description of the use of the individual types of reamers so that the trainees will be in a position to conclude the use of a reamer from its design. ❋ Unknown (1990)

Mike selected the most brutal implement from the kitchen drawer, a spiked [meat tenderiser], and proceeded to [ream] Andy [mercilessly] with it ❋ James (2004)

[jeff] is one [hot] reamer. [my ass is on fire]. ❋ The Undying Zombie (2008)

[Jane] said she wanted to be [on top], but she and Dick both [knew] Dick was to be the reamer this time. ❋ Remarcus (2004)

[Gee], who is that singing in [a circle] by [the fountain]? Must be the Reamer Club! ❋ Fall 08 PC (NRD) (2008)

i jammed [my cunt] [reamer] into her [cockpit] ❋ Turdlunch (2005)

[Beth] had complained all night about the show, so when we got home, I laid [the pipe] to her and gave her a Edison Reamer. She never came so hard in her life. Also known as a [Tesla Cock Prod]. ❋ ChuckGoldmember (2008)

John: [Fucken] rectum reamer loves that [mangina], Ted Ted: He [sure does] John, what a faggot ❋ Kallum (2007)

[sarah] knew she was getting [an ass] [reaming] before she even went to work. ❋ Bast981 (2003)

Dildo banana cucumber [squash] [finger penis] fisting tongue [butt reamer] ❋ Bend It Over Just Wright's (2013)

matt is an ass [reamer], he raped [trina] with a pencil in [p.e]. class ❋ Watchata! (2003)